IPC Document Revision Table Updated 2010 – 2011

IPC Document Revision Table Updated 2010 – 2011  
Product ID
Document Name
Status
J-STD-001
Requirements for Soldered Electrical and Electronic Assemblies
  • Rev. E  4/10
  • Rev D Amend 1  04/08
  • Rev D 2/05
  • Rev. C 3/00
  • Rev. B 10/96
  • Rev. A 1/95
  • Orig. 4/92; Supersedes IPC-S-815
J-STD-001CS
Space Applications Electronic Hardware Addendum for J-STD-001C
  • 4CS 1/04
J-STD-001DS
Space Applications Electronic Hardware Addendum for J-STD-001D
  • Amend 1 09/09
  • DS 11/06
IPC-HDBK-001
Handbook and Guide to the Requirements for Soldered Electrical and Electronic Assemblies
  • Amend 2  10/05
  • Amend. 1  12/00
  • Orig. 3/98
SMC-TR-001
An Introduction to Tape Automated Bonding Fine Pitch Technology
  • Orig. 1/89
IT-WP-001
Myths of E-Commerce
  • Orig. 9/00
SMC-WP-001
Soldering Capability White Paper Report
  • Orig. 8/91
SMEMA 1.2
Mechanical Equipment Interface Standard
  • Update IPC-SMEMA-9851
JP002
Current Tin Whiskers Theory and Mitigation Practices Guideline
  • Orig.  3/06
J-STD-002
Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires
  • Rev. C Amend. 1 10/08
  • Rev. C 12/07
  • Rev. B  2/03
  • Rev. A 10/98
  • Orig. 4/92; Supersedes IPC-S-805
SMC-WP-002
An Assessment of the Use of Lead in Electronic Assembly
  • Orig. 8/92
J-STD-003
Solderability Tests for Printed Boards
  • Rev. B  2/07
  • Rev. A  2/03
  • Original 4/92; Supersedes IPC-S-804
SMC-WP-003
Chip Mounting Technology
  • Orig. 8/93
SMEMA 3.1
Fiducial Mark Standard
J-STD-004
Requirements for Soldering Fluxes
  • Rev. B 12/08
  • Rev. A  1/04
  • Orig. 1/95; Supersedes IPC-SF-818
SMC-WP-004
Design for Success
  • Orig. 4/97
SMEMA 4
Reflow Terms and Definitions
  • Orig.
J-STD-005
Requirements for Soldering Pastes
  • Amend. 1  6/96
  • Orig. 1/95; Supersedes IPC-SP-819
SMC-WP-005
PWB Surface Finishes
  • Orig. 4/97
IPC-HDBK-005
Guide to Solder Paste Assessment
  • Orig. 1/06
SMEMA 5
Screen Printing Terms and Definitions
  • Orig.
J-STD-006
Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for Electronic Soldering Applications
  • Rev. B Amends 1 & 2 10/09
  • Rev. B Amend. 1  6/08
  • Rev. B  1/06
  • Rev. A  5/01
  • Orig. 1/95
SMEMA 6
Electronics Cleaning Terms and Definitions
  • Orig.
SMEMA 7
Fluid Dispensing Terms and Definitions
  • Orig.
WP-008
Setting up Ion Chromatography Capability
  • Orig. 12/05
J-STD-012
Implementation of Flip Chip and Chip Scale Technology
  • Orig. 1/96
J-STD-013
Implementation of Ball Grid Array and Other High Density Technology
  • Orig. 7/96
IPC-DRM-18
Component Identification Desk Reference Manual
  • Rev. H 11/07
  • Rev. G 9/03
  • Rev. F 8/01
  • Rev. E 8/00
  • Rev. D 7/99
  • Rev. C 7/98
  • Rev. B 2/97
  • Rev. A 4/96
  • Orig. 9/95
J-STD-020
Moisture/Reflow Sensitivity Classification of Plastic Surface Mount Devices
  • Rev D Amend 1  3/08
  • Rev D  8/07
  • Rev. C 7/04
  • Rev. B 7/02
  • Rev. A 4/99
  • Orig. 10/96
J-STD-026
Semiconductor Design Standard for Flip Chip Applications
  • Orig. 8/99
J-STD-027
Mechanical Outline Standard for Flip Chip or Chip Scale Configurations
  • Orig.  2/03
J-STD-028
Performance Standard for Flip Chip Scale Bumps
  • Orig. 8/99
J-STD-030
Guideline for Selection and Application of Underfill Material for Flip Chip and Other Micropackages
  • Orig. 9/05
J-STD-032
Performance Standard for Ball Grid Array Bumps and Columns
  • Orig. 6/02
J-STD-033
Packaging and Handling of Moisture Sensitive Non-Hermetic Solid State Surface Mount Devices
  • Rev B Amend 1  1/07
  • Rev B 10/05
  • Rev. A 7/02
  • Orig. 4/99
J-STD-035
Acoustic Microscopy for Non-Hermetic Encapsulated Electronic Components
  • Orig. 4/99
IPC-0040
Optoelectronic Assembly and Packaging Technology  
  • Orig. 5/03
IPC-DRM-40
IPC-DRM-PTH
Through-Hole Solder Joint Evaluation Desk Reference Manual
  • Rev D 11/05
  • Renamed to DRM-PTH
  • Rev. E 2/02
  • Rev. D 7/00
  • Rev. C 9/99
  • Rev. B 1/99
  • Rev. A 8/97
  • Orig. 5/97
IPC-T-50
Terms and Definitions Interconnecting and Packaging Electronic Circuits
  • Rev. H  7/08
  • Rev. G 12/03
  • Rev. F 6/96
  • Rev. E 7/92
  • Rev. D 11/88
  • Rev. C 3/85
  • Rev. B 6/80
  • Rev. A 8/76
  • Orig. 8/75
IPC-DRM-53
Introduction to Electronics Assembly
  • Orig. 6/00
IPC-DRM-56
IPC-DRM-WHA
Wire Preparation & Crimping
  • Rev A 11/06
  • Renamed DRM-WHA
  • Orig.  7/02
IPC-SC-60
Post Solder Solvent Cleaning Handbook
  • Rev. A 8/99
  • Orig. 4/87
IPC-SA-61
Post-Solder Semi-Aqueous Cleaning Handbook
  • Rev. A 6/02
  • Orig. 7/95
IPC-AC-62
Post Solder Aqueous Cleaning Handbook
  • Rev. A 1/96
  • Orig. 12/86
IPC-CH-65
Guidelines for Cleaning of Printed Boards and Assemblies
  • Rev. A 9/99
  • Orig. 12/90
IPC-CS-70
Guidelines for Chemical Handling Safety in Printed Board Manufacturing
  • Orig. 8/88 Obsolete without replacement
J-STD-075
Classification of Non-IC Electronic Components for Assembly Processes
  • Orig. 08/08
IPC-CM-78
Guidelines for Surface Mounting and Interconnecting Chip Carriers
  • Superseded by IPC-SM-780
  • Rev. C – 3/88
  • Orig. 11/83
IPC-MP-83
IPC Policy on Metrication
  • Orig. 8/85 Obsolete without replacement
IPC-PC-90
General Requirements for Implementation of Statistical Process Control
  • Superseded by IPC-9191
  • Orig. 10/90
IPC-QS-95
General Requirements for Implementation of ISO 9000 Quality Systems
  • Obsolete without replacement
  • Orig. 4/93
IPC-L-108
Specification for Thin Metal Clad Base Materials for Multilayer Printed Boards
  • Superseded by IPC-4101
  • Rev. B  6/90
  • Rev. A 10/80
  • Orig. 3/76
IPC-L-109
Specification for Resin Impregnated Fabric (Pregreg) for Multilayer Printed Boards
  • Superseded by IPC-4101
  • Rev. B  7/92
  • Rev. A 10/80
  • Orig. 3/76
IPC-L-110
Preimpregnated, B-Stage Epoxy-Glass Cloth for Multilayer Printed Circuit Boards
  • Rev. A Superseded by IPC-L-109 and IPC-4101
IPC-CC-110
Guidelines for Selecting Core Constructions for Multilayer Printed Wiring Board Applications
  • Superseded by IPC-4121
  • Rev. A 12/97
  • Orig. 1/94
IPC-L-112
Specification for Composite Metal Clad Base materials for Printed Boards
  • Superseded by IPC-4101
  • Rev. A 6/92
  • Orig. 7/81
IPC-L-115
Specification for Rigid Metal Clad Base Materials for Printed Boards
  • Superseded by IPC-4101
  • Rev. B 4/90
  • Rev. A 10/80
  • Orig. 3/77
IPC-L-120
Inspection Procedure for Chemical Processing Suitability of Copper-Clad Epoxy-Glass Laminates
  • Obsolete without replacement
IPC-L-125
Specifications for Plastic Substrates Clad or Unclad for High Speed/High Frequency Interconnections
  • Superseded by IPC-4103
  • Rev. A 7/92
  • Orig. 8/83
IPC-L-130
Specifications for Thin Laminates, Metal Clad, Primarily for General-Purpose Multilayer Printed Boards
  • Superseded by IPC-L-108 and IPC-4101
  • Orig. 1/77
IPC-DD-135
Qualification Testing for Deposited Organic Interlayer Dielectric Materials for Multichip Modules
  • Orig. 8/95
IPC-EG-140
Specification for Finished Fabric Woven from “E” Glass for Printed Boards
  • Superseded by IPC-4412
  • Amend. 1 & 2 6/97
  • Orig. 3/88
IPC-SG-141
Specification for Finished Fabric Woven from “S” Glass for Printed Boards
  • Orig. 2/92
IPC-A-142
Specification for Finished Fabric Woven from Aramid for Printed Boards
  • Orig. 6/90
IPC-QF-143
General Specification for Finished Fabric Woven from Quartz (Pure Fused Silica) for Printed Boards
  • Orig. 2/92
IPC-CF-148
Resin Coated Metal for Printed Boards
  • Superseded by IPC-4563
  • Rev. A 9/98
  • Orig. 6/90
IPC-MF-150
Metal Foil for Printed Wiring Applications
  • Superseded by IPC-4562
  • Rev. F 10/91 Changed from CF-150 to MF-150
  • Rev. E 5/81
  • Rev. D 3/76
  • Rev. C 8/74
  • Rev. B 2/71
  • Rev. A 9/67
  • Orig. 8/66
IPC-CF-152
Composite Metallic Material Specification for Printed Wiring Boards
  • B 12/97
  • A 1/94
  • Orig. 6/90
IPC-FC-203
Specification for Flat Cable, Round Conductor, Ground Plane
  • Obsolete 7/96
  • Orig. 7/85
IPC-FC-210
Performance Specification for Flat-Conductor Undercarpet Power Cable (Type FCC)
  • Obsolete 7/96
  • Orig. 9/85
IPC-FC-213
Performance Specification for Flat Undercarpet Telephone Cable
  • Obsolete 7/96
  • Orig. 9/84
IPC-FC-217
General Document for Connectors, Electric, Header, Receptacle,Insulation Displacement for Use with Round Conductor Flat Cable
  • Obsolete 7/96
  • Reaffirmed 4/90
  • Orig. 8/82
IPC-FC-218B/EIA-RS-429
General Specification for Connectors, Electrical Flat Cable Type
  • Obsolete 7/96
  • Reaffirmed 05/91
  • Reaffirmed 11/81
  • Orig. 7/76
IPC-FC-219
Environment Sealed Flat Cable Connectors for use in Aerospace Applications
  • Obsolete 7/96
  • Orig. 5/84
IPC-FC-220
Specification for Flat Cable, Flat Conductor, Unshielded
  • Obsolete 7/96
  • Rev. C 7/85
  • Rev. B 8/75
  • Rev. A 1/74
  • Orig. 5/70
IPC-FC-221
Specification for Flat-Copper Conductors for Flat Cables
  • Obsolete 7/96
  • Rev. A 5/84
  • Orig. 8/75
IPC-FC-222
Specification of Flat Cable Round Conductor, Unshielded
  • Obsolete 7/96
  • Reaffirmed 5/91
  • Orig. 6/80
IPC-FC-225
Flat Cable Design Guide
  • Obsolete (date)
  • Reaffirmed 10/85
  • Orig. 8/75
IPC-FC-231
Flexible Base Dielectrics for Use in Flexible Printed Wiring
  • Superseded by IPC-4202
  • Amend. 10/95
  • Rev. C 4/92
  • Rev. B 2/86
  • Rev. A 5/83
  • Orig. 7/74
IPC-FC-232
Adhesive Coated Dielectric Films for Use as Cover Sheets for Flexible Printed Wiring and Flexible Bonding Films
  • Superseded by 4203
  • Amend. 10/95
  • Rev. C 6/94
  • Rev. B 2/86
  • Rev. A 5/83
  • Orig. 7/74
IPC-FC-233
Flexible Adhesive Bonding Films
  • Incorporated into IPC-FC-232B
IPC-FC-234
PSA Assembly Guidelines for Single- & Double-Sided Flexible Printed Circuits
  • Orig. 12/97
IPC-FC-240
Single sided flex
  • Superseded by IPC-6013
  • Incorporated into FC-250
  • Rev. B 1/74
  • Rev. A 5/69
  • Orig. 12/65
IPC-FC-241
Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Wiring
  • Superseded by IPC-4204
  • Amend. 10/95
  • Rev. C 4/92
  • Rev. B 2/86
  • Rev. A 5/83
  • Orig. 7/74
IPC-RF-245
Performance Specification for Rigid-Flex Printed Boards
  • Superseded by IPC-6013
  • Orig. 4/87
IPC-D-249
Design Standard for Flexible Single-and Double-Sided Printed Boards
  • Superseded by IPC-2223
  • Orig. 1/87
IPC-FC-250A
Specification for Single – and Double-Sided Flexible Printed Wiring
  • Superseded by IPC-6013
  • Rev. A 9/86
  • Orig. 9/86
IPC-FA-251
Guidelines for Single and Double Sided Flex Circuits
  • Orig. 2/92
IPC-D-275
Design Standard for Rigid Printed Boards and Rigid Printed Board Assemblies
  • Superseded by IPC-2221 and 2222
  • Supersedes IPC-D-319 and IPC-D-949
  • Amendment 1  4/96
  • Orig. 9/91
IPC-RB-276
Qualification and Performance Specification for Rigid Printed Boards
  • Superseded by IPC-6011 and IPC-6012
  • Orig. 3/92; Supersedes IPC-SC-320B and IPC-ML-950C
IPC-D-279
Design Guidelines for Reliable Surface Mount Technology Printed Board Assemblies
  • Orig. 7/96
IPC-D-300
Printed Board Dimensions and Tolerances
  • Superseded by IPC-2615
  • Rev. G 1/84
  • Rev. F 11/74
  • Rev. E 10/70
  • Rev. D 1/70
  • Rev. C 10/65
  • Rev. B 1/64
  • Rev. A 7/61
  • Orig. 8/60
IPC-D-310
Guidelines for Phototool Generation and Measurement Techniques
  • Rev. C  6/91
  • Rev. B 12/85
  • Rev. A 12/77
  • Orig. 9/69
IPC-A-311
Process Control Guidelines for Phototool Generation and Use
  • Orig. 3/96
IPC-D-316
Design Guide for Microwave Circuit Boards Utilizing Soft Substrates
  • Superseded by IPC-2252
  • Orig. 5/95
IPC-D-317
Design Guidelines for Electronic Packaging Utilizing High-Speed Techniques
  • Superseded by IPC-2251
  • Rev. A 1/95
  • Orig. 4/90
IPC-HF-318
Microwave End Product Board Inspection and Test
  • Superseded by IPC-6018
  • Rev. A 12/91
  • Orig. 6/85
IPC-D-319
Design Standard for Rigid Single-and Double-Sided Printed Boards
  • Superseded by IPC-D-275, then by IPC-2221/2222
  • Orig. 1/87
IPC-SD-320
Performance Specification for Rigid Single- and Double-Sided Printed Boards
  • Superseded by IPC-RB-276
  • Supersedes IPC-TC-500
  • Rev. B 11/86
  • Rev. A 3/81
  • Orig. 1/77
IPC-D-322
Guidelines for Selecting Printed Wiring Board Sizes Using Standard Panel Sizes
  • Reaffirmed 9/91
  • Orig. 8/84
IPC-MC-324
Performance Specifications for Metal Core Boards
  • Superseded by IPC-6011 and IPC-6012
  • Orig. 10/88
IPC-D-325
Documentation Requirements for Printed Boards, Assemblies and Support Drawings
  • Rev. A 5/95
  • Orig. 1/87
IPC-D-326
Information Requirements for Manufacturing Printed Board Assemblies
  • Rev. A 1/04
  • Orig. 4/91
IPC-D-330
Design Guide Manual
  • Orig. 1/92
IPC-PD-335
Electronic Packaging Handbook
  • Orig. 12/89
IPC-NC-349
Computer Numerical Control Formatting for Drillers and Routers
  • Orig. 8/85
IPC-D-350
Printed Board Description in Digital Form; Technical Content Identical to IEC-61182-1
  • Rev. D 7/92
  • Rev. C 10/85
  • Rev. B 8/77
  • Rev. A 2/75
  • Orig. 8/72
IPC-D-351
Printed Board Drawings in Digital Form
  • Orig. 8/85
IPC-D-352
Electronic Design Data Description for Printed Boards in Digital Form
  • Orig. 8/85
IPC-D-354
Library Format Description for Printed Boards in Digital Form
  • Orig. 2/87
IPC-D-355
Printed Board Assembly Description in Digital Form
  • Orig. 1/95
IPC-D-356
Bare Board Electrical Test Information in Digital Form
  • Rev. B 10/02
  • Rev. A 1/98
  • Orig. 3/92
IPC-AM-361
Specification for Rigid Substrates for Additive Process Printed Boards
  • Superseded by IPC-4101
  • Orig. 1/82
IPC-MB-380
Guidelines for Molded Interconnection Devices
  • Orig. 10/90
IPC-D-390
Automated Design Guidelines
  • Rev. A 2/88
  • Orig. 7/74
IPC-C-406
Design and Application Guidelines for Surface Mount Connectors
  • Orig. 1/90
IPC-CI-408
Design and Application Guidelines for the Use of Solderless Surface Mount Connectors
  • Orig. 1/94
IPC-BP-421
General Specification for Rigid Printed Board Backplanes with Press Fit Contacts
  • Obsolete without replacement
  • Reaffirmed 4/90
  • Orig. 10/80
IPC-D-422
Design Guide for Press Fit Rigid Printed Board Backplanes
  • Orig. 9/82
IPC-DW-424
General Specification for Encapsulated Discrete Wire Interconnection Boards
  • Orig. 1/95
IPC-DW-425
Design and End Product Requirements for Discrete Wiring Boards
  • Rev. A 5/90
  • Orig. 9/82
IPC-DW-426
Specifications for Assembly of Discrete Wiring
  • Orig. 12/87
IPC-TR-460
Trouble-Shooting Checklist for Wave Soldering Printed Wiring Boards
  • Rev. A 2/84
  • Orig. 1973
IPC-TR-461
Solderability Evaluation of Thick and Thin Fused Coatings
  • Orig. 3/79
IPC-TR-462
Solderability Evaluation of Printed Boards with Protective Coatings Over Long Term Storage
  • Orig. 10/87
IPC-TR-464
Accelerated Aging for Solderability Evaluations
  • Rev. A 12/87
  • Orig. Pub.4/84
IPC-TR-465-1
Round Robin Test on Steam Ager Temperature Control Stability
  • Orig. 1993
IPC-TR-465-2
The Effect of Steam Aging Time and Temperature on Solderability Test Results
  • Orig. 1993
IPC-TR-465-3
Evaluation of Steam Aging on Alternative Finishes, Phase IIA
  • Orig. 7/96
IPC-TR-466
Wetting Balance Standard Weight Comparison Test
  • Orig. 4/95
IPC-TR-467
Supporting Data and Numerical Examples for ANSI/J-STD-001 Appendix D
  • Orig. 10/96
IPC-TR-468
Factors Affecting Insulation Resistance Performance of Printed Boards
  • Orig. 3/79
IPC-TR-470
Thermal Characteristics of Multilayer Interconnection Boards
  • Orig. 1/74
IPC-TR-474
An Overview of Discrete Wiring Techniques
  • Obsolete without replacement
  • Reprint 1984
  • Orig. 3/79
IPC-TR-476
How to Avoid Metallic Growth Problems on Electronic Hardware
Rev. A Electrochemical Migration Electrically Induced Failures In Printed Assembles
  • Rev. A 6/84 (new title)
  • Orig. 9/77
IPC-TR-480
Results of Multilayer Test Program Round Robin IV Phase I
  • Obsolete without replacement
  • Orig. 9/75
IPC-TR-481
Results of Multilayer Test Program Round Robin V
  • Orig. 4/81
IPC-TR-482
New Developments in Thin Copper Foils
  • Orig. 1/76
IPC-TR-483
Dimensional Stability Testing of Thin Laminates – Report on Phase I International Round Robin Test Program
  • Rev. A 3/91
  • Addendums 10/87
  • Orig. 4/84
IPC-TR-484
Results of IPC Cooper Foil Ductility Round Robin Study
  • Orig. 4/86
IPC-TR-485
Results of Cooper Foil Rupture Strength Test Round Robin Study
  • Orig. 3/85
IPC-TR-486
Report on Round Robin Study to Correlate Interconnect Stress Test (IST) with Thermal Stress/Microsectioning Evaluations for Detecting the Presence of Inner-layer Separations
  • Orig. 7/01
IPC-TR-549
Measles in Printed Wiring Boards
  • Orig. 11/78
IPC-TR-551
Quality Assessment of Printed Boards Used for Mounting and Interconnecting Electronic Components
  • Orig. 7/93
IPC-DR-570
General Specification for 1/8 Inch Diameter Shank Carbide Drills for Printed Boards
  • Obsolete without replacement
  • Rev. A 4/84
  • Orig. 1/79
IPC-DR-572
Drilling Guidelines for Printed Boards
  • Rev A  3/07
  • Orig. 4/88
IPC-TR-576
Additive Process Evaluation
  • Obsolete without replacement
  • Orig. 9/77
IPC-TR-578
Leading Edge Manufacturing Technology Report – Resulting of a Round Robin Study on Minimum Conductor Width and Plated-Through Holes in Rigid, Bare Copper, Double-Sided Printed Wiring Boards
  • Orig. 9/84
IPC-TR-579
Round Robin Reliability Evaluation of Small Diameter Plated Through Holes in Printed Wiring Boards
  • Orig. 9/88
IPC-TR-580
Cleaning and Cleanliness Test Program Phase 1 Test Results
  • Orig. 10/89
IPC-TR-581
IPC Phase 3 Controlled Atmosphere Soldering Study
  • Orig. 8/94
IPC-TR-582
IPC Phase 3 No-Clean Flux Study
  • Orig. 11/94
IPC-TR-583
An In-Depth Look At Ionic Cleanliness Testing
  • Orig. 7/02
IPC-WP/TR-584
IPC White Paper and Technical Report on Halogen-Free Materials used for Printed Circuit Boards and Assemblies
  • Rev A  8-07
  • Orig.  4/03
IPC-TR-585
Time, Temperature and Humidity Stress of Final Board Finish Solderability
  • Orig.  5/06
IPC-TR-586
Immersion Silver Plating Thickness Round Robin Investigation Data Set Compendium (supports IPC-4553A)
  • Orig. 5/09
IPC-A-600
Acceptability of Printed Boards
  • Rev. H  4/10
  • Amend. 1 01/08
  • Rev. G  7/04
  • Rev. F 11/99
  • Rev. E 8/95
  • Rev. D ’89
  • Rev. C ’78
  • Rev. B ’74
  • Rev. A ’70
  • Orig. ’64
IPC-SS-605
Printed Board Quality Evaluation Slide Set
  • Obsolete without replacement
IPC-QE-605
Printed Board Quality Evaluation Handbook
  • Rev. A 2/99
J-STD-609
Marking and Labeling of Components, PCBs and PCBAs to Identify Lead (Pb) Pb-Free and Other Attributes and Devices
  • Rev. A  2/10
  • Orig. 5/07; supersedes IPC-1066
IPC-A-610
Acceptability of Electronic Assemblies
  • Rev E  4/10
  • Rev D Amend 1 4/08
  • Rev. D 2/05
  • Rev. C 1/00
  • Rev. B 12/94
  • Rev. A 3/90
  • Orig. 8/83
IPC-A-610DC
IPC-A-610D Telecom Addendum
  • Orig. 8/09
IPC-HDBK-610
Handbook and Guide to IPC-A-610 (Includes B-C-D comparison)
  • Amend 1  10/05
  • Orig. 9/02
IPC-QE-615
Assembly Quality Evaluation Handbook
  • Obsolete without replacement
IPC/WHMA-A-620
Requirements and Acceptance for Cable and Wire Harness Assemblies
  • Rev A 7/06
  • Orig. 1/02
IPC-AI-640
User’s Guidelines for Automated Inspection of Unpopulated Thick Film Hybrid Substrates
  • Obsolete without replacement
  • Orig. 1/87
IPC-AI-641
User’s Guidelines for Automated Solder Joint Inspection
  • Obsolete without replacement
  • Orig. 1/87
IPC-AI-642
User’s Guidelines for Automated Inspection of Artwork, Interlayers, and Unpopulated PWB’s
  • Obsolete without replacement
  • Orig. 10/88
IPC-OI-645
Standard for Visual Optical Inspection Aids
  • Orig. 10/93
IPC-TM-650
Test Methods Manual
  • Updated per test method
IPC-ET-652
Guidelines and Requirements for Electrical Testing of Unpopulated Printed Boards
  • Superseded by IPC-9252
  • Orig. 10/90
IPC-QL-653
Qualification of Facilities that Inspect/Test Printed Boards, Components, and Material
  • Rev. A 11/97
  • Orig. 8/88
IPC-MI-660
Incoming Inspection of Raw Materials Manual
  • Orig. 2/84
IPC-R-700
Suggested Guidelines for Modification, Rework and Repair of Printed Boards and Assemblies
  • Superseded by IPC-7711A/7721A
  • Rev. C 1/88
  • Rev. B 9/77
  • Rev. A 12/71
  • Orig. 9/67
IPC-TA-720
Technology Assessment Handbook on Laminates
  • Orig. ’86
IPC-TA-721
Technology Assessment Handbook on Multilayer Boards
  • Orig. ’88
IPC-TA-722
Technology Assessment of Soldering
  • Orig. ’90
IPC-TA-723
Technology Assessment Handbook on Surface Mounting
  • Orig. ’91
IPC-TA-724
Technology Assessment Series on Cleanrooms
  • Orig. 4/98
IPC-PE-740
Troubleshooting Guide for Printed Board Manufacture and Assembly
  • Rev. A 12/97
  • Orig. 1/85
IPC-CM-770
Printed Board Component Mounting
  • Rev. E 1/04
  • Rev. D 1/96
  • Rev. C 1/87
  • Rev. B 10/80
  • Rev. A 3/76
  • Orig. 9/68
IPC-SM-780
Component Packaging and Interconnecting with Emphasis on Surface Mounting
  • Orig. 3/88
IPC-SM-782
Surface Mount Design and Land Pattern Standard
  • Superseded by IPC-7351
  • Amend. 2  4/99
  • Amend. 1  10/96
  • Rev. A 8/93
  • Orig. 3/87
IPC-SM-784
Guidelines for Chip-on-Board Technology Implementation
  • Orig. 11/90
IPC-SM-785
Guidelines for Accelerated Reliability Test of Surface Mount Solder Attachments
  • Orig. 11/92
IPC-SM-786
Procedures for Characterizing and Handling of Moisture/ Reflow Sensitive ICs
  • Superseded by J-STD-020 and J-STD-033
  • Rev. A 1/95
  • Orig. 12/90
IPC-MC-790
Guidelines for Multichip Module Technology Utilization
  • Orig. 8/92
IPC-S-801
  • Superseded by IPC-804 and J-STD-003
IPC-S-803
  • Superseded by IPC-804 and J-STD-003
IPC-S-804
Solderability Test Methods for Printed Wiring Boards
  • Superseded by J-STD-003
  • Rev. A 1/87
  • Orig. 1/82
IPC-S-805
Solderability Tests for Component Leads and Terminations
  • Superseded by
  • J-STD-002
  • Orig. 1/85
IPC-MS-810
Guidelines for High Volume Microsection
  • Orig. 10/93
IPC-S-815
General Requirements for Soldering Electronic Interconnections
  • Superseded byJ-STD-001
  • Rev. B 12/87
  • Rev. A 6/81
  • Orig. 11/77
IPC-S-816
SMT Process Guideline and Checklist
  • Orig. 7/93
IPC-SM-817
General Requirements for Dielectric Surface Mounting Adhesives
  • Orig. 11/89
IPC-SF-818
General Requirement for Electronic Soldering Fluxes
  • Superseded by J-STD-004
  • Rev. 12/91
  • Orig. 2/88
IPC-SP-819
General Requirements and Test Methods for Electronic Grade Solder Paste
  • Superseded by J-STD-005
  • Orig. 10/88
IPC-AJ-820
Assembly and Joining Manual
  • Orig. 8/96
IPC-CA-821
General Requirements for Thermally Conductive Adhesives
  • Orig. 1/95
IPC-CC-830
Qualification and Performance of Electronic Insulating Compound for Printed Board Assemblies
  • Amend. 1 10/08
  • Rev B 08/02
  • Amend. 1 7/99
  • Rev. A 10/98
  • Orig. 1/84
IPC-HDBK-830
Conformal Coating Handbook
  • Orig. 10/02
IPC-SM-839
Pre and Post Solder Mask Application Cleaning Guidelines
  • Orig. 4/90
IPC-SM-840
Qualification and Performance of Permanent Polymer Coating (Solder Mask) for Printed Boards
  • Rev. D 4/07
  • Amend. 1 6/00
  • Rev. C 1/96
  • Rev. B 5/88
  • Rev. A 7/83
  • Orig. 11/77
IPC-HDBK-840
Solder Mask Handbook
  • Orig. 09/06
IPC-H-855
Hybrid Microcircuit Design Guide
  • Obsolete without replacement
  • Orig. 10/82
IPC-D-859
Design Standard for Thick Film Multilayer Hybrid Circuits
  • Orig. 12/89
IPC-HM-860
Specification for Multilayer Hybrid Circuits
  • Orig. 1/87
IPC-TF-870
Qualification and Performance of Polymer Thick Film Printed Boards
  • Orig. 11/89
IPC-ML-910
Design and End Production Specification for Rigid Multilayer Printed Boards
  • Superseded by IPC-D-949, IPC-D-275, and subsequently IPC-2221 for Design and IPC-ML-950, IPC-RB-276, and subsequently IIPC-6011 for End Product Specification
  • Rev. A  8/76
  • Orig.  6/68
IPC-D-949
Design Standard for Rigid Multilayer Printed Boards
  • Superseded by IPC-D-275 and subsequently by IPC-2221/2222
  • Orig. 1/87
IPC-ML-950
Performance Specification for Rigid Multilayer Printed Boards
  • Superseded by IPC-RB-276 and subsequently IPC-6011/6012
  • Rev. C 11/8
  • Rev. B 12/77
  • Rev. A 9/70
  • Orig. 1/66
IPC-ML-960
Qualification and Performance Specification for Mass Laminated Panels for Multilayer Printed Boards
  • Orig. 7/94
IPC-ML-975
End Product Documentation Specification for Multilayer Printed Wiring Boards
  • Superseded by IPC-D-325
  • Orig. 9/69
IPC-ML-990
Performance Specification for Flexible Multilayer Wiring
  • Superseded by IPC-6011
  • Orig. 9/72
IPC-1043
Cleaning & Cleanliness Test Program Phase 3 Water Soluble Fluxes Part 1
  • Orig. 8/92
IPC-1044
Cleaning & Cleanliness Test Program Phase 3 Water Soluble Fluxes Part 2
  • Orig. 10/92
IPC-1065
Material Declaration Handbook
  • Orig. 1/05
IPC-1066
Labeling of PCBs and Assemblies
  • Superseded by J-STD-609
  • Orig. 12/04
IPC-TP-1090
The Layman’s Guide to Qualifying New Fluxes for MIL-STD-2000A or MT-0002
  • Orig. 7/96
IPC-TP-1103
Manufacturing Concerns When Soldering with Gold Plated Component Leads or Circuit Board Pads
  • Obsolete without replacement
IPC-TP-1114
The Layman’s Guide to Qualifying a Process to J-STD-001B
  • Orig. 1/98
IPC-TP-1115
Selection and Implementation Strategy for A Low-Residue No-Clean Process
  • Orig. 12/98
IPC-1131
IT Guidelines for PWB Manufacturers
  • Orig. 4/00
IPC-1331
Voluntary Safety Standard for Electrically Heated Process Equipment
  • Orig. 3/00
IPC-1601
Printed Board Handling and Storage Guidelines
  • Orig. 8/10
IPC-1710
OEM Standard for Printed Board Manufacturers’ Qualification Profile (MQP)
  • Rev. A 7/04
  • 12/97 updated
  • Orig. 2/94
IPC-1720
Assembly Qualification Profile (AQP)
  • Rev. A 7/04
  • Orig. 7/96
IPC-1730
Laminator Qualification Profile (LQP)
  • Rev. A 6/00
  • Orig. 1/98
IPC-1731
Strategic Raw Materials Supplier Qualification Profile
  • Orig. Pub. 6/00
IPC-1751
Generic Requirements for Declaration Process Management
  • Rev. A  2/10
  • Vers. 1.1  3/07
  • Orig. Pub.  3/06
IPC-1752
Materials Declaration Management (Includes 2 PDF forms)
  • Rev. A 2/10
  • Vers. 1.1 3/07
  • Orig. Pub. 3/06
IPC-1756
Manufacturing Process Data Management
  • Orig. 4/10
IPC-2141
Controlled Impedance Circuit Boards and High Speed Logic Design
  • Rev. A 3/04
  • Orig. 4/96
IPC-2152
Standard for Determining Current Carrying Capacity in Printed Board Design
  • Orig. 8/09
IPC-2221
Generic Standard on Printed Board Design
  • Rev. A 5/03
  • Amend. 1 01/00
  • Orig. 2/98; Supersedes IPC-D-275
IPC-2222
Sectional Design Standard for Rigid Organic Printed Boards
  • Orig. 2/98; Supersedes IPC-D-275
IPC-2223
Sectional Design Standard for Flexible Printed Boards
  • Rev. B 5/08
  • Rev. A 6/04
  • Orig. 11/98; Supersedes IPC-D-249
IPC-2224
Sectional Standard for Design of PWBs for PC Cards
  • Orig. 1/98
IPC-2225
Sectional Design Standard for Organic Multichip Modules (MCM-L) and MCM-L Assemblies
  • Orig. 5/98
IPC-2226
Design Standard for High-Density Array or Peripheral Leaded Component Mounting Structures
  • Orig. 4/03
IPC-2251
Design Guidelines for Electronic Packaging Utilizing High Speed Techniques
  • Orig. 12/03
IPC-2252
Design and Manufacturing Guide for RF/Microwave Circuit Boards
  • Orig. 7/02
IPC/JPCA-2315
Design Guide for High Density Interconnects (HDI) and Microvia
  • Orig. 6/00
IPC-2316
Design Guide for Embedded Passive Device Printed Boards
  • Orig. 3/07
IPC-2501
Definition for Web-based Exchange of XML Data
  • Orig. 7/03
IPC-2511
Generic Requirements for Implementation of Product Manufacturing Description Data and Transfer Methodology
  • Rev. B  1/02
  • Rev A  1/00
  • Orig. 1 1/98
IPC-2512
Sectional Requirements for Implementation of Administrative Methods for Manufacturing Data Description
  • Rev A 11/00
  • Orig. 11/98
IPC-2513
Sectional Requirements for Implementation of Drawing Methods for Manufacturing Data Description
  • Rev A 11/00
IPC-2514
Sectional Requirements for Implementation of Printed Board Manufacturing Data Description
  • Rev A 11/00
IPC-2515
Sectional Requirements for Implementation of Bare Board Product Electrical Testing Data Description
  • Rev A 11/00
IPC-2516
Sectional Requirements for Implementation of Assembled Board Product Manufacturing Data Description
  • Rev A 11/00
IPC-2517
Sectional Requirements for Implementation of Assembly In-Circuit Testing Data Description
  • Rev A 11/00
IPC-2518
Sectional Requirements for Implementation of Part List Product Data Description
  • Rev A 11/00
IPC-2524
PWB Fabrication Data Quality Rating System
  • Orig. 2/99
IPC-2531
Standard Recipe File Format Specification
  • Orig. 3/99
IPC-2541
Generic Requirements for Electronic Manufacturing Shop Floor Equipment Communication
  • Orig. 10/01
IPC-2546
Sectional Requirements for Shop Floor Electronic Assembly Equipment Communication
  • Amend. 1  01/03
  • Amend. 2  01/05
  • Orig. 10/01
IPC-2547
Sectional Requirements for Shop Floor Electronic Inspection and Test Equipment Communication
  • 1/02
IPC-2571
Generic Requirements for Electronic Manufacturing Supply Chain Communication-Product Data Exchange (PDX)
  • 11/01
IPC-2576
Sectional Requirements for Electronics Manufacturing Supply Chain Communication of As-Built Product Data – Product Exchange (PDX)
  • 11/01
IPC-2578
Sectional Requirements for Supply Chain Communication of Bill of material and Product Design Configuration Data-Product Data Exchange (PDX)
  • 11/01
IPC-2581
Generic Requirements for Printed Board Assembly Products Manufacturing Description Data and Transfer Methodology (Offspring)
  • Amend 1  5/07
  • Orig. 3/04
IPC-2582
Sectional Requirements for Implementation of Design Characteristics for Manufacturing Data Description
  • Orig. 5/07
IPC-2583
Sectional Requirements for Implementation of Administrative Methods for Manufacturing Data Description
  • Orig. 5/07
IPC-2584
Sectional Requirements for Implementation of Printed Board Fabrication Data Description
  • Orig. 5/07
IPC-2588
Sectional Requirements for Implementation of Part List Product Data Description
  • Orig. 5/07
IPC-2611
Generic Requirements for Electronic Product Documentation
  • Orig. 4/10
IPC-2612
Sectional Requirements for Electronic Diagramming Documentation (Schematic and Logic Descriptions)
  • Orig. 4/10
IPC-2612-1
Sectional Requirements for Electronic Diagramming Symbol Generation Methodology
  • Orig. 4/10
IPC-2614
Sectional Requirements for Board Fabrication Documentation
  • Orig. 4/10
IPC-2615
Printed Board Dimensions and Tolerances
  • Orig. 6/00; Supersedes IPC-D-300
IPC-3406
Guidelines for Electrically Conductive Surface Mount Adhesives
  • Orig. 7/96
IPC-3408
General Requirements for Anistropically Conductive Adhesive Films
  • Orig. 11/96
IPC-4101
Specification for Base Materials for Rigid and Multilayer Boards
  • Rev. C 8/09
  • Rev. B Amends 1&2  4/07
  • Rev. B Amend 1  2/07
  • Rev. B  6/06
  • Rev. A Amend 1 6/02
  • Rev. A 6/02
  • Supersedes IPC-L-108, IPC-L-109, IPC-L-112, IPC-L-115
  • Orig. 12/97
IPC-4103
Specification for Plastic Substrates, Clad or Unclad, for High Speed/High Frequency Interconnection
  • Orig. 01/02; Supersedes IPC-L-125
IPC/JPCA-4104
Specification for High Density Interconnect (HDI) and Microvia Materials
  • Orig. 5/99
IPC-4110
Specification and Characterization Methods for Nonwoven Cellulose Based Paper for Printed Boards
  • Orig. 8/98
IPC-4121
Guidelines for Selecting Core Constructions for Multilayer Printed Wiring Board Applications
  • Orig. 1/00; Supersedes IPC-CC-110A
IPC-4130
Specification and Characterization Methods for Nonwoven “E” Glass Mat
  • Orig. 9/98
IPC-4202
Flexible Base Dielectrics for Use in Flexible Printed Wiring
  • Rev. A  4/10
  • Orig. 5/02; Supersedes IPC-FC-231C
IPC-4203
Adhesive Coated Dielectric Films for Use as Cover Sheets
  • Orig. 5/02; Supersedes IPC-FC-232C
IPC-4204
Flexible Metal-Clad Dielectrics for Use in Fabrication of
  • Orig. 5/02; Supersedes IPC-FC-241C
IPC-4411
Specification and Characterization Methods for Nonwoven Para-Aramid Reinforcement
  • Rev. A 11/03
  • Orig. 4/99
IPC-4412
Specification for Finished Fabric Woven form “E” Glass for Printed Boards
  • Rev. A Amend 2  5/09
  • Rev. A Amend 1  3/08
  • Rev. A 1/06
  • Orig. 6/02; Supersedes IPC-EG-140A
IPC-4552
Specification for Electroless Nickel/Immersion Gold (ENIG) Plating for Printed Circuit Boards
  • Orig. 10/02
IPC-4553
Specification for Immersion Silver Plating for Printed Circuit Boards
  • Rev. A 5/09
  • Orig. 6/05
IPC-4554
Specification for Immersion Tin Plating for Printed Circuit Boards
  • Orig. 2/07
IPC-4562
Metal Foil for Printed Wiring Applications
  • Rev. A 4/08
  • Amend. 1  5/05
  • Orig. 5/00; Supersedes IPC-MF-150F
IPC-4563
Resin Coated Copper Foil for Printed Boards Guideline
  • Orig. (replaces CF-148A) 11/07
IPC-4761
Design Guide for Protection of Printed Board Via Structures
  • Orig. 7/06
IPC-4781
Qualification and Performance Specification of Permanent, Semi-Permanent and Temporary Legend and/or Marking Inks
  • Orig. 5/08
IPC-4811
Specification for Embedded Passive Device Resistor Materials for Rigid and Multilayer Printed Boards
  • Orig. 4/08
IPC-4821
Specification for Embedded Passive Device Capacitor Materials for Rigid and Multilayer Printed Boards
  • Amend. 1  4/10
  • Orig. 5/06
IPC-5701
Users Guide for Cleanliness of Unpopulated Printed Boards
  • Orig. 7/03
IPC-5702
Guidelines for OEMs in Determining Acceptable Levels of Cleanliness of Unpopulated Printed Boards
  • Orig. 6/07
IPC-5704
Cleanliness Requirements for Unpopulated Printed Boards
  • Orig. 12/09
IPC-6011
Generic Performance Specification for Printed Boards
  • Orig. 7/96
IPC-6012
Qualification and Performance Specification for Rigid Printed Boards
  • Rev. C  4/10
  • Amend. 2  3/08
  • Rev. B with Amend 1  2/07
  • Rev. B 8/04
  • Amend. 1  7/00
  • Rev. A  10/99
  • Orig.  7/96
IPC-6013
Qualification and Performance Specification for Flexible Printed Boards
  • Rev B.  1/09
  • Rev. A with Amend. 2  4/06
  • Amend. 1  1/05
  • Rev. A  11/03
  • Supersedes IPC-RF-245 and IPC-FC-250
  • Amend. 1  4/00
  • Orig. 11/98
IPC-6015
Qualification and Performance Specification for Organic Multichip Module (MCM-L) Mounting and Interconnecting Structures
  • Orig. 2/98
IPC-6016
Qualification and Performance Specification for High Density Interconnect (HDI) Layers or Boards
  • Orig. 5/99
IPC-6017
Qualification and Performance Specification for Printed Boards Containing Embedded Passive Devices
  • Orig. 3/09
IPC-6018
Microwave End Product Board Inspection and Test
  • Rev. A  1/02
  • Orig. 1/98
IPC/JPCA-6202
Performance Guide Manual for Single- and Double-Sided Flexible Printed Wiring Boards
  • Orig. 2/99
IPC/JPCA-6801
Terms & Definitions, Test Methods, and Design Examples for Build-Up/High Density Interconnection
  • Orig. 1/00
IPC-7094
Design and Assembly Process Implementation for Flip Chip and Die Size Components
  • Orig. 1/09
IPC-7095
Design and Assembly Process Implementation for BGAs
  • Rev. B  3/08
  • Rev. A 11/04
  • Orig. 8/00
IPC-7351
Generic Requirements for Surface Mount Design and Land Pattern Standard
  • Rev. B 6/10
  • Rev. A  2/07
  • Supersedes IPC-SM-782A with Amendments 1 & 2
  • Orig.  2/05
IPC-7525
Guidelines for Stencil Design
  • Rev. A  2/07
  • Orig.  5/00
IPC-7526
Stencil and Misprinted Board Cleaning Handbook
  • Orig.  2/07
IPC-7530
Guidelines for Temperature Profiling for Mass Soldering (Wave and Reflow) Processes
  • Orig.  5/01
IPC-7711/7721
Rev B renamed to:
Rework, Repair and Modification of Electronic Assemblies
  • Rev B  11/07
  • Rev A  10/03
  • Orig.  4/98; Supersedes IPC-R-700C
IPC-7912
Calculation of DPMO and Manufacturing Indices for Printed Wiring Assemblies
  • Rev. A  1/04
  • Orig.  7/00
IPC-8413-1
Specification for Manufacturing Process Carriers for Handling Optical Fiber
  • Orig.  4/03
IPC-8497-1
Cleaning Methods and Contamination Assessment for Optical Assembly
  • Orig. 12/05
IPC-9151
Printed Board Capability, Quality and Relative Reliability (PCQR2) Benchmark Test Standard and Database
  • Rev. C 5/10
  • Rev. B  2/07
  • Rev. A 5/03
  • Orig.  6/02
IPC-9191
General Guideline for implementation of Statistical Process Control (SPC)
  • Supersedes IPC-PC-90
  • Orig. 11/99
IPC-9194
Implementation of Statistical Process Control (SPC) Applied to Printed Board Assembly Manufacture Guideline
  • Orig.  9/04
IPC-9199
SPC Quality Rating
  • Orig.  9/02
IPC-9201
Surface Insulation Resistance Handbook
  • Rev A  8/07
  • Orig.  7/96
IPC-9251
Test Vehicles for Evaluating Fine Line Capability
  • Orig.  7/00
IPC-9252
Guidelines and Requirements for Electrical Testing of Unpopulated Printed Boards
  • Rev. A  11/08
  • Orig. 02/01; Supersedes IPC-ET-652A
IPC-9261
In-Process DPMO and Estimated Yield for PWAs
  • Rev. A 10/06
  • Orig. 3/02
IPC-9501
PWB Assembly Process Simulation for Evaluation of Electronic Components
  • Orig. 7/95
IPC-9502
PWB Assembly Soldering Process Guidelines for Non-IC Electronic Components
  • Orig. 4/99
IPC-9503
Moisture Sensitivity Classification for Non-IC Components
  • Superseded by J-STD-075 08/08
  • Orig. 4/99
IPC-9504
Assembly Process Simulation for Evaluation of Non-IC Components
  • Orig. 6/98
IPC-9591
Performance Parameters (Mechanical, Electrical, Environmental and Quality/Reliability) for Air Moving Devices
  • Orig.  4/06
IPC-9592
Requirements for Power Conversion Devices for the Computer and Telecommunications Industries
  • Rev. A  5/10
  • Orig.  9/08
IPC-9691
User Guide for the IPC-TM-650, Method 2.6.25, Conductive Anodic Filament (CAF) Resistance Test (Electrochemical Migration Testing)
  • Rev A  8/07
  • Orig. 10/05
IPC-9701
Qualification and Performance Test Methods for Surface Mount Solder Attachments
  • Rev. A  2/06
  • Orig.  1/02
IPC/JEDEC-9702
Monotonic Bend Characterization of Board-Level Interconnects
  • Orig.  6/04
IPC/JEDEC-9703
Mechanical Shock Test Guidelines for Solder Joint Reliability
  • Orig.  3/09
IPC/JEDEC-9704
Printed Wiring Board Strain Gage Test Guideline
  • Orig.  6/05
IPC-9850
Surface Mount Equipment Performance Characterization
  • Orig.  7/02
IPC-SMEMA-9851
Equipment Interface Specification
  • Orig. 11/04
IPC-DRM-SMT
Surface Mount Solder Joint Evaluation Desk Reference Manual
  • Rev. C 11/05
  • Rev. B 4/00
  • Rev. A 3/99
  • Orig. 7/98
IPC-EMSI-TC
IPC Sample Master Ordering Agreement for EMS Companies and OEMs
  • Orig.  3/02
Roadmap
International Technology Roadmap for Electronic Interconnections
  • Updated 2009
  • Updated 2007
  • Updated 2005
  • Updated 2003
  • Updated 2001
  • Updated 9/97
  • Orig. 6/95

Entre em contato e Solicite seu orçamento:


PTI / Hecker JF
Rua Peixoto Gomide, 209
01409-901 Sao Paulo, SP – BRAZIL
Phone:(11) 3159-2535
Fax :(11) 3159-2450
E-mail: jh@pti.com.br
———————————————————————————
Authorized Subscription Agency – Booksellers – Information Consultant
———————————————————————————
Tem alguma questão adicional? – Sinta-se livre em contactar-nos.

About technospub

We can search all kind of publications, print or electronic, from any part of the world. Buy Brazilian and Latin American books, periodicals and CDs from Publicacoes Internacionais.We can ship to any address in the world.
This entry was posted in Uncategorized. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s