Caso tenha alguma sugestão, elogio, dúvida ou observação não hesite em nos contatar, teremos o maior prazer em atendê-los.
Rua Joaquinzão do Araguaia, 100 – CS 11
CEP 05386-310 - São Paulo – Brasil
SAC – Serviço de Apoio ao Cliente
- ASNT Nondestructive Testing Handbook, Third Edition Set (Ten Volumes), Hardcover
- CCH 70-4 Cahier des Charges Hydrauliques – Specification for Inspection of Steel Castings of Hydraulic Machines, – Edition 4, [November 2014], Print Edition, English
- ASME BPVC 2013 Section IV – Rules for Construction of Heating Boilers, Language: English, ISBN: 9780791834688, Print – Book
- Power Piping: The Complete Guide to the ASME B31.1 (2013), Charles IV Becht (Author), ISBN-13: 978-0791860144, [Hardcover]
- ETRTO Standards Manual 2014 – Print Edition – In English with notes in French and German
- August 2014
- March 2014
- February 2014
- January 2014
- December 2013
- August 2013
- July 2013
- June 2013
- May 2013
- April 2013
- March 2013
- February 2013
- January 2013
- September 2012
- August 2012
- May 2012
- April 2012
- March 2012
- February 2012
- January 2012
- December 2011
- November 2011
- October 2011
- September 2011
- August 2011
- July 2011
- June 2011
- May 2011
- April 2011
- March 2011
- February 2011
- January 2011
- December 2010
- November 2010
- October 2010
ASME BPVC-VIII-3 – 2013 Section 8 – Rules for Construction of Pressure Vessels Division 3 – Alternative Rules for Construction of High Pressure Vessels / Print-Book / Order #: 600083 + Binder Order #: 600140
Produto disponível sob importação. Pré Pedido. Entrega em Julho de 2013
Pre-orders being accepted through June 30, 2013.
ASME BPVC-VIII-3 -2013 BPVC Section VIII-Rules for Construction of Pressure Vessels Division 3 – Alternative Rules for Construction of High Pressure Vessels / BPVC-VIII-3 – 2013 / 07/2013 / ISBN: ISBN: 9780791834749 / Print-Book / Order #: 600083 + Binder Order #: 600140
Pre-orders being accepted through June 30, 2013.
About the BPVC
Since its first issuance in 1914, ASME’s Boiler and Pressure Vessel Code (BPVC) has pioneered modern standards-development, maintaining a commitment to enhance public safety and technological advancement to meet the needs of a changing world. More than 100,000 copies of the BPVC are in use in 100 countries around the world.
Product Scope / Abstract
This Division of Section VIII provides requirements applicable to the design, fabrication, inspection, testing, and certification of pressure vessels operating at either internal or external pressures generally above 10,000 psi. Such vessels may be fired or unfired. This pressure may be obtained from an external source, a process reaction, by the application of heat from a direct or indirect source, or any combination thereof. Division 3 rules cover vessels intended for a specific service and installed in a fixed location or relocated from work site to work site between pressurizations. The operation and maintenance control is retained during the useful life of the vessel by the user who prepares or causes to be prepared the design specifications. Division 3 does not establish maximum pressure limits for either Section VIII, Divisions 1 or 2, nor minimum pressure limits for this Division. Rules pertaining to the use of the UV3 ASME Product Certification Marks are also included.
Careful application of this Section will help users to comply with applicable regulations within their jurisdictions, while achieving the operational, cost and safety benefits to be gained from the many industry best-practices detailed within these volumes.
Key changes to this 2013 Edition include:
New Mandatory Appendix on Establishing Governing BPVC Editions and Case for Pressure Vessels and Parts
KD-1, KD-2, KD-3, to include the simplified elastic-plastic analysis, thermal stress ratcheting assessment and a fatigue penalty factor for linear elastic fatigue analysis
New Nonmandatory Appendix B, which includes the requirements of withdrawn standard High Pressure Systems Nonmandatory Appendix A and Section 3000
To permit electroslag welding for weld overlay in KF-2 Supplemental Welding Fabrication Requirements
All changes to this 2013 Edition are incorporated into the appropriate page and each affected area is identified with a designator. Each Section includes a Summary of Changes that lists the material affected by the change, plus the nature of the change. There will no longer be Addenda service for this 2013 Edition or for future Editions.
Intended for manufacturers, users, constructors, designers and others concerned with the design, fabrication, assembly, erection, examination, inspection and testing of pressure vessels, plus all potential governing entities.
BPVC purchasers may wish to purchase a binder from ASME (BPVC Binder), but the publication will also fit a standard three-ring binder.
Publish Date: 2013